OEM APPROVED · IP68 · 2 YEAR WARRANTY
LED Bulb 90W

OEM Approved.The Only Standard That Matters.

The LED headlamp with full OEM approval. OEM engineers have tested this bulb against their own vehicle standards before approving it for their production line. Aviation-grade aluminium. IP68.

OEM approved. Aviation-grade build. IP68. Built for Indian roads.

LED Bulb 90W
OEMAPPROVED
15,000LUMEN
IP68WATERPROOF
2 YrWARRANTY
01

OEM Approved. A Validation Result, Not a Claim.

OEM approval means OEM engineers tested this bulb against their own vehicle standards — vibration, heat cycling, humidity, electrical stress — before approving it for production. This is a validation result, not marketing language.

VALIDATED OEM APPROVED · 90W SERIES ·
90W exploded view
02

Aviation-Grade Aluminium. IP68.

Housing machined from aviation-grade aluminium alloy for heat dissipation and structural integrity. IP68 rated — fully sealed against water and dust. Built for monsoons, mountain roads, and highway speeds.

03

OEM Beam Pattern. Precision Focus.

Beam pattern designed to OEM standards — maximum road illumination, no glare for oncoming traffic. The same beam geometry your vehicle manufacturer specifies.

OEM Approved
IP68 Waterproof
2 Year Replacement Warranty
Standard European beam pattern diagram
Standard European Beam BEAM GEOMETRY SCHEMATIC
90W beam on road at night
04

15,000 Lumen. All-Night Performance.

15,000 lumen output — sustained by the alloy housing's continuous heat dissipation. No throttling, no fade. The same brightness at the end of a long night drive as at the start.

Product Overview

LED Bulb 90W — build, beam and thermal design.

OEM approved IP68 15,000 lumen
Specification

Technical Specifications

Specification Detail Specification Detail Power 90W Housing Aviation-grade aluminium alloy Brightness 15,000 Lumen Voltage 12V / 24V Colour Temp 6500K Fitments H1 / H4 / H7 / H8 / H19 / H27 / 9005 / 9012 / H18 IP Rating IP68 Warranty 2 Year Replacement
Certifications Tested and certified
BIS
BIS Certified
CE
CE Marked
ICAT
ICAT Approved
RoHS
RoHS Compliant
IATF
IATF 16949
ISO
ISO 9001

Frequently Asked Questions

OEM beam standard means the bulb's beam pattern and focus geometry are designed to match the specifications set by vehicle manufacturers for their factory-fitted headlamps. Note: only the 90W series carries full OEM approval; the 120W–260W series are built to OEM beam geometry but are not formally OEM-approved products.

Most LED bulbs run at peak rated wattage only at startup. As the chip heats up, standard designs throttle power to protect the LED. Blackcat LED bulbs minimise this gap through aviation-grade aluminium housing, multi-modal thermal management, and higher-efficiency LED chips. The result is near-rated lumen output in steady operation, not just at switch-on.

Yes. The 90W is the only LED bulb in the Blackcat range with formal OEM approval — meaning OEM engineers have tested and signed off on it against their own vehicle standards before approving it for production line use. This is a validation result, not a marketing claim.

All Blackcat LED bulbs carry a 2-year replacement warranty. If the bulb fails within 2 years under normal operating conditions, we replace it. Contact info@blackcat.in with your purchase details.

No — 6500K and 4300K are separate SKUs, not a switchable mode within one bulb. Contact info@blackcat.in to confirm availability for your chosen power tier and fitment.

Downloads

Download the Blackcat product catalog for full specifications across all LED bulb tiers.

Download Product Catalog (PDF)

Get in Touch

For fitment guidance, bulk orders, or product queries — write to info@blackcat.in

Explore the Range

LED Bulb 120W
LED Bulb 120W OEM Fitment Standard · 16,000 Lumen · IP68 View Product
LED Bulb 160W
LED Bulb 160W OEM Fitment Standard · 19,000 Lumen · IP68 View Product
Lazer 2000 Fog Light
Lazer 2000 Fog Light Twin Laser-Cut Lenses · OEM Beam · IP68 View Product
Scroll to Top