OEM FITMENT STANDARD · 3 COPPER TUBES · IP68
LED Bulb 220W

OEM Beam Standard.Sustained.

3 copper tubes maintain 21,000 lumen consistently. OEM beam standard. Aviation-grade aluminium. IP68. Tested -20°C to +70°C.

21,000 lumens sustained. OEM beam. 3 copper tubes. Built to last.

LED Bulb 220W
220WOUTPUT
21,000LUMEN
3COPPER TUBES
IP68WATERPROOF
01

3 Copper Tubes. Sustained Brightness.

Three copper heat pipes sustain 21,000 lumen output — preventing the brightness degradation that affects LED bulbs without thermal management.

LED Bulb 220W 3 copper tube cooling detail
LED Bulb 220W exploded view
02

Aviation-Grade Aluminium. IP68.

Aviation-grade aluminium housing — the primary heat sink working alongside the copper tubes. IP68 rated. Fully sealed against water, dust, and corrosion. Tested across every Indian climate condition.

03

OEM Beam Standard. IP68. Tested -20°C to +70°C.

Beam geometry designed to match OEM specifications. IP68. Aviation-grade housing covers every Indian climate. 2-year replacement warranty.

OEM Fitment Standard
3 Copper Tube Cooling
IP68 / 2 Year Warranty
Standard European beam pattern diagram
Standard European Beam BEAM GEOMETRY SCHEMATIC
LED Bulb 220W road performance at night
04

21,000 Lumen. Consistent, Mile After Mile.

21,000 lumen output sustained consistently — copper tube thermal management keeps the chip running at temperature through the full night drive.

Product Overview

LED Bulb 220W — build, beam and thermal design.

3 Copper Tubes OEM Beam 21,000 Lumen
Specification

Technical Specifications

Specification Detail Specification Detail Power 220W Cooling 3 Copper Tubes Brightness 21,000 Lumen IP Rating IP68 Colour Temp 6500K / 4300K Housing Aviation-grade aluminium alloy Voltage 12V / 24V Fitments H1 / H4 / H19 / H8 / H11 / H9 / H16 / 9005 / H7 / H18 Warranty 2 Year Replacement
Certifications Tested and certified
BIS
BIS Certified
CE
CE Marked
ICAT
ICAT Approved
RoHS
RoHS Compliant
IATF
IATF 16949
ISO
ISO 9001

Frequently Asked Questions

OEM beam standard means the bulb's beam pattern and focus geometry are designed to match the specifications set by vehicle manufacturers for their factory-fitted headlamps. Note: only the 90W series carries full OEM approval; the 120W–260W series are built to OEM beam geometry but are not formally OEM-approved products.

Most LED bulbs run at peak rated wattage only at startup. As the chip heats up, standard designs throttle power to protect the LED. Blackcat LED bulbs minimise this gap through aviation-grade aluminium housing, multi-modal thermal management, and higher-efficiency LED chips. The result is near-rated lumen output in steady operation, not just at switch-on.

The 220W is compatible with standard 12V and 24V vehicle systems. It draws more power than lower-tier bulbs, so we recommend checking your headlamp socket rating before fitting. Contact info@blackcat.in with your vehicle make and model if you're unsure.

All Blackcat LED bulbs carry a 2-year replacement warranty. If the bulb fails within 2 years under normal operating conditions, we replace it. Contact info@blackcat.in with your purchase details.

No — 6500K and 4300K are separate SKUs, not a switchable mode within one bulb. Contact info@blackcat.in to confirm availability for your chosen power tier and fitment.

Downloads

Download the Blackcat product catalog for full specifications across all LED bulb tiers.

Download Product Catalog (PDF)

Get in Touch

For fitment guidance, bulk orders, or product queries — write to info@blackcat.in

Explore the Range

LED Bulb 160W
LED Bulb 160W OEM Fitment Standard · 19,000 Lumen · IP68 View Product
LED Bulb 260W
LED Bulb 260W OEM Fitment Standard · 22,500 Lumen · 3 Copper Tubes View Product
Lazer 2000 Fog Light
Lazer 2000 Fog Light Twin Laser-Cut Lenses · OEM Beam · IP68 View Product
Scroll to Top