OEM FITMENT STANDARD · IP68 · 2 YEAR WARRANTY
LED Bulb 160W

OEM Beam Standard.Built Tough.

19,000 lumen to OEM beam geometry. Aviation-grade aluminium housing, 2 copper tubes. IP68. Tested -20°C to +70°C.

19,000 lumen. OEM beam standard. IP68. Built for Indian roads.

LED Bulb 160W
160WOUTPUT
19,000LUMEN
IP68WATERPROOF
2 YrWARRANTY
01

OEM Beam Standard. Precision Focused.

Beam geometry designed to match OEM specifications — maximum road illumination with zero glare for oncoming traffic. The same standard your vehicle manufacturer uses, available across all major Indian fitments.

LED Bulb 160W OEM beam pattern diagram
LED Bulb 160W exploded view
02

Aviation-Grade Aluminium. 2 Copper Tubes.

Housing machined from aviation-grade aluminium alloy, with 2 copper heat pipes carrying heat away from the chip for heat dissipation and structural integrity. IP68 rated — fully sealed against water, dust, and corrosion. Built for monsoons, mountain roads, and highway speeds.

03

IP68. Tested -20°C to +70°C.

Fully sealed against water and dust. Aviation-grade aluminium housing with 2 copper tube cooling. Tested across the full temperature range of Indian conditions. 2-year replacement warranty.

OEM Fitment Standard
IP68 Waterproof
2 Year Replacement Warranty
LED Bulb 160W all-weather testing
LED Bulb 160W ALL-WEATHER TESTING
LED Bulb 160W road performance at night
04

19,000 Lumen. Night After Night.

19,000 lumen output sustained consistently — not just at startup. The aviation-grade housing and 2 copper tubes keep the chip running at operating temperature so brightness holds through the full night drive.

Product Overview

LED Bulb 160W — build, beam and thermal design.

OEM Beam Standard IP68 19,000 Lumen
Specification

Technical Specifications

Specification Detail Specification Detail Power 160W Cooling 2 Copper Tubes Brightness 19,000 Lumen IP Rating IP68 Colour Temp 6500K Housing Aviation-grade aluminium alloy Voltage 12V / 24V Fitments H1 / H4 / H7 / H8 / H18 / H19 / 9005 / 9012 Warranty 2 Year Replacement
Certifications Tested and certified
BIS
BIS Certified
CE
CE Marked
ICAT
ICAT Approved
RoHS
RoHS Compliant
IATF
IATF 16949
ISO
ISO 9001

Frequently Asked Questions

OEM beam standard means the bulb's beam pattern and focus geometry are designed to match the specifications set by vehicle manufacturers for their factory-fitted headlamps. Note: only the 90W series carries full OEM approval; the 120W–260W series are built to OEM beam geometry but are not formally OEM-approved products.

Most LED bulbs run at peak rated wattage only at startup. As the chip heats up, standard designs throttle power to protect the LED. Blackcat LED bulbs minimise this gap through aviation-grade aluminium housing, multi-modal thermal management, and higher-efficiency LED chips. The result is near-rated lumen output in steady operation, not just at switch-on.

The 160W supports H1, H4, H7, H8, H18, H19, 9005, and 9012 — covering most Indian passenger cars, SUVs, and commercial vehicles. Check the Vehicle Type / Fitment table on the category page, or write to info@blackcat.in with your vehicle's make and model to confirm before ordering.

All Blackcat LED bulbs carry a 2-year replacement warranty. If the bulb fails within 2 years under normal operating conditions, we replace it. Contact info@blackcat.in with your purchase details.

No — 6500K and 4300K are separate SKUs, not a switchable mode within one bulb. Contact info@blackcat.in to confirm availability for your chosen power tier and fitment.

Downloads

Download the Blackcat product catalog for full specifications across all LED bulb tiers.

Download Product Catalog (PDF)

Get in Touch

For fitment guidance, bulk orders, or product queries — write to info@blackcat.in

Explore the Range

LED Bulb 120W
LED Bulb 120W OEM Fitment Standard · 16,000 Lumen · IP68 View Product
LED Bulb 220W
LED Bulb 220W OEM Fitment Standard · 21,000 Lumen · 3 Copper Tubes View Product
Lazer 2000 Fog Light
Lazer 2000 Fog Light Twin Laser-Cut Lenses · OEM Beam · IP68 View Product
Scroll to Top